Stamping
Die-set guide pillar and bush
- Process
- Turning, hardening, grinding the pillar between centres, grinding and honing the bush bore
- Typical materials
- Bearing steel 1.3505 (100Cr6), hardened; bronze or ball-cage bushes as alternatives
- Typical use
- Keeping the upper and lower halves of a stamping die in line
CNC machining
Turned, milled, ground and eroded parts, from single prototypes to series.
Stamping
Punches, die components and progressive tooling.
Injection moulds
Mould components: inserts, ejectors, guides and sprue bushes.
Sheet metal and forming
Laser-cut, bent and deep-drawn parts.
